Difference between revisions of "Mifare RC522 Module RFID Reader"

From Wiki
Jump to: navigation, search
(Created page with "=='''Introduction'''== MF RC522 is applied to the highly integrated read and write 13.56MHz contactless communication card chip, NXP launched by the company for the "table" ap...")
 
(Resource)
Line 16: Line 16:
 
Data Transfer Rate: Max. 10Mbit / s
 
Data Transfer Rate: Max. 10Mbit / s
 
=='''Resource'''==
 
=='''Resource'''==
 +
[http://www.sunfounder.com/wiki/index.php?title=File:RFID-RC522_test_experiment.zip RFID-RC522_test_experiment][[File:ZIP.jpg]]

Revision as of 10:10, 29 March 2016

Introduction

MF RC522 is applied to the highly integrated read and write 13.56MHz contactless communication card chip, NXP launched by the company for the "table" application of a low-voltage, low-cost, small size of non-contact card chip, smart meters and portable handheld devices developed better choice. The MF RC522 use of advanced modulation and demodulation concept completely integrated in all types of 13.56MHz passive contactless communication methods and protocols. In addition, support rapid CRYPTO1 encryption algorithm, terminology validation MIFARE products. MFRC522 support MIFARE series of high-speed non-contact communication, two-way data transmission rate up to 424kbit/s. As new members of the 13.56MHz reader card series of highly integrated chip family, MF RC522 MF RC500 MF RC530 There are a lot of similarities, but also have many of the characteristics and differences. Communication between it and the host SPI mode helps to reduce the connection narrow PCB board volume, reduce costs.

Pin Function

Electrical Parameters

Operating current: 13—26mA/DC 3.3V
Idle current: 10-13mA/ DC 3.3V
Sleep current: <80uA
Peak current: <30mA
Operating frequency: 13.56MHz
Supported Cards: mifare1 S50, mifare1 S70, mifare UltraLight, mifare Pro, mifare Desfire
Physical features: size: 40mm×60mm
Ambient operating temperature: - 20-80 degrees centigrade
Ambient storage temperature: - 40-85 degrees centigrade
Ambient relative humidity: 5%—95%

Module Interface SPI Parameters

Data Transfer Rate: Max. 10Mbit / s

Resource

RFID-RC522_test_experimentZIP.jpg