Difference between revisions of "Install dragit"
From Wiki
| Line 11: | Line 11: | ||
1. Type in the command below: <br> | 1. Type in the command below: <br> | ||
wget https://s3.amazonaws.com/sunfounder/Raspberry/dragit_installer.py | wget https://s3.amazonaws.com/sunfounder/Raspberry/dragit_installer.py | ||
| + | On your computer/tablet, open a web browser (Chrome/Firefox/Safari recommended), enter the IP address of the Raspberry Pi and then 8000: <br> | ||
| + | ''Example: 192.168.0.177:8000'' | ||
Revision as of 08:14, 6 September 2018
Before any operations, you need to log into the Raspberry Pi remotely first. Here's how:
1． Get the IP address of the Raspberry Pi:
https://www.raspberrypi.org/documentation/remote-access/ip-address.md
2． Log in with the IP address, by ssh or VNC:
For ssh: https://www.raspberrypi.org/documentation/remote-access/ssh/README.md
For VNC: https://www.raspberrypi.org/documentation/remote-access/vnc/README.md
Now you're on the RPi already. Open a terminal for command lines. Let's see what's next.
1. Type in the command below:
wget https://s3.amazonaws.com/sunfounder/Raspberry/dragit_installer.py
On your computer/tablet, open a web browser (Chrome/Firefox/Safari recommended), enter the IP address of the Raspberry Pi and then 8000:
Example: 192.168.0.177:8000
