Difference between revisions of "Ultrasonic Module"

From Wiki
Jump to: navigation, search
(Resource)
Line 48: Line 48:
 
</pre>
 
</pre>
 
=='''Resource'''==
 
=='''Resource'''==
[http://www.lengeek.com/wiki/index.php?title=File:NewPing.zip NewPing library][[File:ZIP.jpg]]<br>
+
[http://www.sunfounder.com/wiki/index.php?title=File:NewPing.zip NewPing library][[File:ZIP.jpg]]<br>
[http://www.lengeek.com/wiki/index.php?title=File:MAX232_DataSheet.pdf MAX232_DataSheet][[File:PDF.jpg]]<br>
+
[http://www.sunfounder.com/wiki/index.php?title=File:MAX232_DataSheet.pdf MAX232_DataSheet][[File:PDF.jpg]]<br>
[http://www.lengeek.com/wiki/index.php?title=File:SGM324YS14.pdf SGM324YS14 datasheet][[File:PDF.jpg]]
+
[http://www.sunfounder.com/wiki/index.php?title=File:SGM324YS14.pdf SGM324YS14 datasheet][[File:PDF.jpg]]

Revision as of 04:01, 31 March 2016

Introduction

An upgraded ultrasonic module – improved properties and performance in various aspects Ultrasonic .jpg
Ultrasonic ranging module HC - SR04 provides 2cm - 700cm non-contact measurement function, the ranging accuracy can reach to 3mm. The modules includes ultrasonic transmitters, receiver and control circuit. The basic principle of work:
(1) Using IO trigger for at least 10us high level signal;
(2) The Module automatically sends eight 40 kHz and detect whether there is a pulse signal back.
(3) IF the signal back, through high level , time of high output IO duration is the time from sending ultrasonic to returning. Test distance = (high level time×velocity of sound (340M/S) / 2.

Pin Function

TRIG: Trigger Pulse Input
ECHO: Echo Pulse Output
GND: Ground
VCC: 5V Supply

Features

Working Voltage DC5V
Working Current 16mA
Working Frequency 40Hz
Max Range 700cm, Ensured stable signal within 5m, gradually faded signal outside 5m till disappearing at 7m position.
Min Range 2cm
Trigger Input Signal 10uS TTL pulse
Echo Output Signal Input TTL lever signal and the range in proportion
Dimension 46x20.5x15 mm

Pricinple

The Timing diagram is shown below. You only need to supply a short 10uS pulse to the trigger input to start the ranging, and then the module will send out an 8 cycle burst of ultrasound at 40 kHz and raise its echo. The Echo is a distance object that is pulse width and the range in proportion .You can calculate the range through the time interval between sending trigger signal and receiving echo signal. Formula: uS / 58 = centimeters or uS / 148 =inch; or: the range = high level time * velocity (340M/S) / 2; we suggest to use over 60ms measurement cycle, in order to prevent trigger signal to the echo signal. Cha.png

Note: If you want to test in a 500cm+ distance, you need to change the NewPing library, which defines the maximum distance (i.e. 500cm). You can set it as 700 or higher. it is as shown in follwing:

#define MAX_SENSOR_DISTANCE 710

Resource

NewPing libraryZIP.jpg
MAX232_DataSheetPDF.jpg
SGM324YS14 datasheetPDF.jpg