Difference between revisions of "SF210"

From Wiki
Jump to: navigation, search
Line 10: Line 10:
 
* Supports low voltage alarm, LED status indicating and lost model alarm
 
* Supports low voltage alarm, LED status indicating and lost model alarm
 
* Provides user manual for Naze32 Flight Controller, and the assemly and calibration videos.
 
* Provides user manual for Naze32 Flight Controller, and the assemly and calibration videos.
 +
=='''Related links'''==
 +
 +
1. For the assembling videos, please refer to this link:
 +
 +
<font color="blue">'''https://www.sunfounder.com/video/category/?cat=40'''</font>
 +
 +
2.For the remote control, you are recommended to refer to this link:
 +
 +
<font color="blue">'''https://www.sunfounder.com/rc.html'''</font>
 +
 +
3.The SunFoundere 250 quadcopter kit uses the 6040 propellers blades. If you want to experience a violent 3D flight, the 5045 propeller blades are needed. For them, you are recommended to refer to this link:
 +
 +
<font color="blue">'''https://www.sunfounder.com/5045propeller.html'''</font>
 +
 +
4.For the camera kit, you are recommended to refer to this link:
 +
 +
<font color="blue">'''https://www.sunfounder.com/drone/cc3d/camera.html'''</font>
 +
 +
5. For the FPV TFT LCD, you are recommended to refer to this link:
 +
 +
<font color="blue">'''https://www.sunfounder.com/drone/fpv-lcd.html'''</font>
 +
 +
6. For the FPV Image Transceiver Kit, you are recommended to refer to this link:
 +
 +
<font color="blue">'''https://www.sunfounder.com/drone/fpv-image-transceiver-kit-with-700tvl-hd-camera-mini-ts5823-32-channel-av-transmitter-5-8g-mushroom-antenna-for-quadcopter-multirotor-aircraft.html'''</font>

Revision as of 08:55, 18 October 2016

Introduction

MG 4301-1.jpg
The SF210 multirotor aircraft kit is tailored for the hobbyists for FPV flying. It runs the Nazeflight32, which is developed based on Naze32, the most popular flight controller now and one of the mainstream flight controllers for multicopter racing. It’s very powerful since it supports low voltage alarm, LED status indicating and lost model alert. The kit runs the open-source flight control firmware CleanFlight and the firmware for the electronic speed controller. Designed to meet the hobbyists’ higher requirement on flying aircraft models, the kit features stability, agility and flexibility. It can fly freely in the deep forest, through narrow aisles, etc. In addition, you can fly it in a small space or have a rapid 3D flight based on your own configuration and parameter setting.

Features

  • It’s a fabulous 4-axis multirotor aircraft tailored for FPV racing hobbyists with dazzling light, top speed and crash-proof body.
  • The Nazeflight32 flight controller runs a 32-bit STM32F103 processor, a three-axis gyroscope and accelerometer
  • Weight: 440g; Working voltage: 11.1V; Battery capacity: 1300mAh;
  • Supports low voltage alarm, LED status indicating and lost model alarm
  • Provides user manual for Naze32 Flight Controller, and the assemly and calibration videos.

Related links

1. For the assembling videos, please refer to this link:

https://www.sunfounder.com/video/category/?cat=40

2.For the remote control, you are recommended to refer to this link:

https://www.sunfounder.com/rc.html

3.The SunFoundere 250 quadcopter kit uses the 6040 propellers blades. If you want to experience a violent 3D flight, the 5045 propeller blades are needed. For them, you are recommended to refer to this link:

https://www.sunfounder.com/5045propeller.html

4.For the camera kit, you are recommended to refer to this link:

https://www.sunfounder.com/drone/cc3d/camera.html

5. For the FPV TFT LCD, you are recommended to refer to this link:

https://www.sunfounder.com/drone/fpv-lcd.html

6. For the FPV Image Transceiver Kit, you are recommended to refer to this link:

https://www.sunfounder.com/drone/fpv-image-transceiver-kit-with-700tvl-hd-camera-mini-ts5823-32-channel-av-transmitter-5-8g-mushroom-antenna-for-quadcopter-multirotor-aircraft.html