OLED-SSD1306 Module

From Wiki
Revision as of 02:09, 26 July 2016 by Root (Talk | contribs)

Jump to: navigation, search

Introduction

Ssd1.jpg

SSD1306 is a single-chip CMOS OLED/PLED driver with controller for organic / polymer light emitting diode dot-matrix graphic display system. It consists of 128 segments and 64commons. This IC is designed for Common Cathode type OLED panel. The SSD1306 embeds with contrast control, display RAM and oscillator, which reduces the number of external components and power consumption. It has 256-step brightness control. It is suitable for many compact portable applications, such as Smart watch,eal-time image display of camera on smart car,Battery management device,etc.

Schematic

Ssd2.jpg

Features

  • For OLED-SSD1306, a more elaborate and beautiful screen than LCD, with more functions
  • High contrast, thus supporting clear display With no need of backlight
  • Working voltage: 2.7V - 5.5V; PCB size: 2.8 x 3.2cm
  • Standard double-sided printed circuit board, 1.16mm thick, with an elegant layout, 3-mm holes at two corners for easy fixing
  • Low power consumption: 0.04W during normal operation

Text

Step1:Connecting circuit

SSD1306 ------- Arduino Uno board
GND ------- GND
VCC         -------          5V
SCL          -------         A5
SDA          -------         A4

Step2:Install the Arduino IDE in your computer.For detailed steps,refer to https://www.sunfounder.com/wiki/index.php?title=Install_Arduino_Software

Step3:Loading U8glib library.

Through the links at the bottom of the page to download U8glib.zip and unzip.Open Graphics_Test.ino,in the Arduino IDE, import the library from the "Add Library" Menu.



Find the u8glib folder you just extracted,clink open.


Step4:Upload the sketch.Before clicking the Upload (right arrow button) icon, set the Port and Board under Tools menu.





Experimental phenomenon


Resource