Joystick PS2 Module

From Wiki
Revision as of 03:50, 20 April 2016 by Root (Talk | contribs)

Jump to: navigation, search

Introduction

Joystick1.png
The joystick PS2 module two lines of analog output (X, Y) and one of digital output (Z). The cross rocker is a bidirectional 10k resistor; its resistance changes with different directions. Push the joystick towards different directions and the voltage read increases or decreases; press it down, then the output is low level and the corresponding LED lights up; otherwise it stays off.
The schematic diagram of the module is as follows:
Joystick2.png

Application

The module can be applied to convenient control of objects (like a two-degree of freedom servo mount) to move in a two-dimensional space. It can be used in the remote controller for many robot projects

Resource

Test Experiment for ArduinoLINK.jpg
Test Experiment for Raspberry PiLINK.jpg