Difference between revisions of "I2C LCD2004"

From Wiki
Jump to: navigation, search
(Copy the code)
(Download and run the code)
 
(5 intermediate revisions by the same user not shown)
Line 85: Line 85:
  
 
/********************************/
 
/********************************/
// include the library code
+
// Include necessary libraries
 
#include <Wire.h>  
 
#include <Wire.h>  
 
#include <LiquidCrystal_I2C.h>
 
#include <LiquidCrystal_I2C.h>
LiquidCrystal_I2C lcd(0x27,20,4);  // set the LCD address to 0x27 for a 16 chars and 2 line display
+
 
 +
// Initialize the LCD object, set the LCD I2C address to 0x27 for a 20x4 display
 +
LiquidCrystal_I2C lcd(0x27, 20, 4); 
 +
 
 
/*********************************************************/
 
/*********************************************************/
 
void setup()
 
void setup()
 
{
 
{
   lcd.init(); //initialize the lcd
+
   lcd.init();             // Initialize the LCD
   lcd.backlight(); //open the backlight  
+
   lcd.backlight();         // Turn on the backlight
    
+
 
 +
  // Set cursor to the top left corner and print the string on the first row
 +
  lcd.setCursor(0, 0);   
 +
  lcd.print("   Hello, world!    ");
 +
 
 +
  // Move to the second row and print the string
 +
  lcd.setCursor(0, 1);   
 +
  lcd.print("  IIC/I2C LCD2004  ");
 +
 
 +
  // Move to the third row and print the string
 +
  lcd.setCursor(0, 2);   
 +
  lcd.print("  20 cols, 4 rows  ");
 
    
 
    
   lcd.setCursor ( 0, 0 );            // go to the top left corner
+
   // Move to the fourth row and print the string
  lcd.print("    Hello,world!    "); // write this string on the top row
+
   lcd.setCursor(0, 3);    
  lcd.setCursor ( 0, 1 );            // go to the 2nd row
+
  lcd.print("  IIC/I2C LCD2004  "); // pad string with spaces for centering
+
  lcd.setCursor ( 0, 2 );            // go to the third row
+
  lcd.print("  20 cols, 4 rows  "); // pad with spaces for centering
+
   lcd.setCursor ( 0, 3 );           // go to the fourth row
+
 
   lcd.print(" www.sunfounder.com ");
 
   lcd.print(" www.sunfounder.com ");
 
}
 
}
Line 108: Line 117:
 
void loop()  
 
void loop()  
 
{
 
{
 
+
  // Empty loop
 
}
 
}
 
/************************************************************/
 
/************************************************************/
 +
 
</pre>
 
</pre>
  
Line 137: Line 147:
 
<pre>
 
<pre>
 
/*****************************************************
 
/*****************************************************
  * name:I2C_Address
+
  * Name: I2C_Address
  * function:read the address of the I2C lcd1602
+
  * Function: Read the address of the I2C LCD1602
 
  * Connection:
 
  * Connection:
  * I2C                UNO  
+
  * I2C                Arduino UNO  
 
  * GND                GND
 
  * GND                GND
  * VCC                 5V
+
  * VCC                 5V
  * SDA                 A4(pin20 in mega2560)
+
  * SDA                 A4 (pin 20 in Mega2560)
  * SCL                 A5(pin21 in mega2560)
+
  * SCL                 A5 (pin 21 in Mega2560)
 
  ********************************************************/
 
  ********************************************************/
  
#include <Wire.h>
+
#include <Wire.h> // Include Wire library for I2C communication
  
void setup()
+
void setup() {
{
+
   Wire.begin();                     // Initialize I2C communication
   Wire.begin();
+
   Serial.begin(9600);               // Start serial communication at 9600 baud rate
   Serial.begin(9600);
+
   Serial.println("\nI2C Scanner"); // Print a message to the serial monitor
   Serial.println("\nI2C Scanner");
+
 
}
 
}
void loop()
+
 
{
+
void loop() {
   byte error, address;
+
   byte error, address; // Declare variables for storing error status and I2C address
   int nDevices;
+
   int nDevices;         // Variable to keep track of number of devices found
   Serial.println("Scanning...");
+
 
   nDevices = 0;
+
   Serial.println("Scanning..."); // Print scanning message
   for(address = 1; address < 127; address++ )
+
   nDevices = 0;                   // Initialize the device count to 0
  {
+
 
     // The i2c_scanner uses the return value of
+
  // Loop through all possible I2C addresses (1 to 126)
    // the Write.endTransmisstion to see if
+
   for (address = 1; address < 127; address++) {
    // a device did acknowledge to the address.
+
     Wire.beginTransmission(address);  // Start a transmission to the I2C address
     Wire.beginTransmission(address);
+
     error = Wire.endTransmission();   // End the transmission and get the status
     error = Wire.endTransmission();
+
 
     if (error == 0)
+
     // Check if device responded without error (acknowledged)
    {
+
     if (error == 0) {
       Serial.print("I2C device found at address 0x");
+
       Serial.print("I2C device found at address 0x"); // Notify device found
       if (address<16)
+
       if (address < 16) Serial.print("0");             // Print leading zero for addresses less than 16
        Serial.print("0");
+
       Serial.print(address, HEX);                     // Print the address in hexadecimal
       Serial.print(address,HEX);
+
       Serial.println(" !");
       Serial.println(" !");
+
       nDevices++;                                   // Increment the device count
       nDevices++;
+
     } else if (error == 4) {                       // If there was an unknown error
     }
+
       Serial.print("Unknown error at address 0x"); // Notify about the error
    else if (error==4)
+
       if (address < 16) Serial.print("0");         // Print leading zero for addresses less than 16
    {
+
       Serial.println(address, HEX);                 // Print the address in hexadecimal
       Serial.print("Unknow error at address 0x");
+
       if (address<16)
+
        Serial.print("0");
+
       Serial.println(address,HEX);
+
 
     }
 
     }
 
   }
 
   }
 +
 +
  // After scanning, print the results
 
   if (nDevices == 0)
 
   if (nDevices == 0)
     Serial.println("No I2C devices found\n");
+
     Serial.println("No I2C devices found\n"); // No devices found
 
   else
 
   else
     Serial.println("done\n");
+
     Serial.println("done\n"); // Scanning done
   delay(5000); // wait 5 seconds for next scan
+
 
 +
   delay(5000); // Wait 5 seconds before the next scan
 
}
 
}
 
</pre>
 
</pre>
Line 315: Line 323:
 
'''Step 6''': Compile.<br>
 
'''Step 6''': Compile.<br>
 
<pre>
 
<pre>
gcc lcd2004.c –o lcd2004 –lwiringPiDev –lwiringPi
+
gcc lcd2004.c -o lcd2004 -lwiringPiDev -lwiringPi
 
</pre>
 
</pre>
  

Latest revision as of 02:32, 15 November 2023

Introduction

As we all know, though LCD and some other displays greatly enrich the man-machine interaction, they share a common weakness. When they are connected to a controller, multiple IOs will be occupied of the controller which has no so many outer ports. Also it restricts other functions of the controller. Therefore, LCD2004 with an I2C bus is developed to solve the problem.
I2C bus is a type of serial bus invented by PHLIPS. It is a high performance serial bus which has bus ruling and high or low speed device synchronization function required by multiple host system. I2C bus has only two bidirectional signal lines, Serial Data Line (SDA) and Serial Clock Line (SCL). The blue potentiometer on the I2C LCD2004 is used to adjust backlight to make it easier to display on the I2C LCD2004.

I2c lcd2004.png

- GND: Ground
- VCC: Voltage supply, 5V.
- SDA: Serial data line. Connect to VCC through a pullup resistor.
- SCL: Serial clock line. Connect to VCC through a pullup resistor.

I2C Address

The default address is basically 0x27, in a few cases it may be 0x3F.

Taking the default address of 0x27 as an example, the device address can be modified by shorting the A0/A1/A2 pads; in the default state, A0/A1/A2 is 1, and if the pad is shorted, A0/A1/A2 is 0.

I2c address.jpg


Backlight/Contrast

Backlight can be enabled by jumper cap, unplug the jumper cap to disable the backlight. The blue potentiometer on the back is used to adjust the contrast (the ratio of brightness between the brightest white and the darkest black).

Back lcd1602.jpg


- Shorting Cap: Backlight can be enabled by this cap,unplug this cap to disable the backlight.
- Potentiometer: It is used to adjust the contrast (the clarity of the displayed text), which is increased in the clockwise direction and decreased in the counterclockwise direction.

For Arduino User

Components

- 1 *SunFounder Mars board
- 1 * I2C LCD2004 module
- 1 * USB cable
- Several jump wires

Connect the circuit

See the following table for connection between the I2C LCD2004 and the SunFounder Uno board:

I2C LCD2004 Arduino Board
GND GND
VCC 5V
SDA A4 /pin 20 mega2560
SCL A5 /pin 21 mega2560

Arduino i2c lcd2004.png

Add library

Before you upload the code to the control board,you neeed to add the LiquidCrystal_I2C library.
1) Download the LiquidCrystal_I2C library

2) Open the Arduino IDE,Select Sketch -> Include Library -> Add ZIP Library

Rfd.png

3) Find the file LiquidCrystal_I2C which you just download. Click it open and then you'll be prompted by "Library added to your libraries. Check 'Import libraries'”. You also can see the libraries just imported have appeared on the list by Sketch->Include Library->LiquidCrystal_I2C.
Fdfds.png

Copy the code

Copy the following code to the Arduino IDE

/*****************************************
 * name: I2C LCD2004
 * function: You should now see your I2C LCD2004 display "Hello,world!","IIC/I2C LCD2004"
 * "20 cols, 4 rows","www.sunfounder.com"
 ********************************/
//Email:service@sunfounder.com
//Website:www.sunfounder.com

/********************************/
// Include necessary libraries
#include <Wire.h> 
#include <LiquidCrystal_I2C.h>

// Initialize the LCD object, set the LCD I2C address to 0x27 for a 20x4 display
LiquidCrystal_I2C lcd(0x27, 20, 4);  

/*********************************************************/
void setup()
{
  lcd.init();              // Initialize the LCD
  lcd.backlight();         // Turn on the backlight
  
  // Set cursor to the top left corner and print the string on the first row
  lcd.setCursor(0, 0);     
  lcd.print("    Hello, world!    "); 
  
  // Move to the second row and print the string
  lcd.setCursor(0, 1);     
  lcd.print("   IIC/I2C LCD2004  "); 
  
  // Move to the third row and print the string
  lcd.setCursor(0, 2);     
  lcd.print("  20 cols, 4 rows   "); 
  
  // Move to the fourth row and print the string
  lcd.setCursor(0, 3);     
  lcd.print(" www.sunfounder.com ");
}
/*********************************************************/
void loop() 
{
  // Empty loop
}
/************************************************************/

Upload the code

Before upload the code ,you need to select correct Board and Port,please follow the steps:

1) Click Tools ->Board and select Arduino/Genuino Uno.

Board.png

2) Then select Tools ->Port.

Port.png

3) Click to the upload icon to upload the code to the control board

UPLOAD.png
If "Done uploading" appears at the bottom of the window, it means the sketch has been successfully uploaded.

Read I2C Address

If everything is correct, but the display just shows 16 black rectangles on Line 1.it may be the address of i2c is not 0x27,therfore you need to run the following code to read the address,then modify the 0x27 to which you read.

LiquidCrystal_I2C lcd(0x27,16,2);
/*****************************************************
 * Name: I2C_Address
 * Function: Read the address of the I2C LCD1602
 * Connection:
 * I2C                 Arduino UNO 
 * GND                 GND
 * VCC                 5V
 * SDA                 A4 (pin 20 in Mega2560)
 * SCL                 A5 (pin 21 in Mega2560)
 ********************************************************/

#include <Wire.h>  // Include Wire library for I2C communication

void setup() {
  Wire.begin();                     // Initialize I2C communication
  Serial.begin(9600);               // Start serial communication at 9600 baud rate
  Serial.println("\nI2C Scanner");  // Print a message to the serial monitor
}

void loop() {
  byte error, address;  // Declare variables for storing error status and I2C address
  int nDevices;         // Variable to keep track of number of devices found

  Serial.println("Scanning...");  // Print scanning message
  nDevices = 0;                   // Initialize the device count to 0

  // Loop through all possible I2C addresses (1 to 126)
  for (address = 1; address < 127; address++) {
    Wire.beginTransmission(address);  // Start a transmission to the I2C address
    error = Wire.endTransmission();   // End the transmission and get the status

    // Check if device responded without error (acknowledged)
    if (error == 0) {
      Serial.print("I2C device found at address 0x");  // Notify device found
      if (address < 16) Serial.print("0");             // Print leading zero for addresses less than 16
      Serial.print(address, HEX);                      // Print the address in hexadecimal
      Serial.println(" !");
      nDevices++;                                   // Increment the device count
    } else if (error == 4) {                        // If there was an unknown error
      Serial.print("Unknown error at address 0x");  // Notify about the error
      if (address < 16) Serial.print("0");          // Print leading zero for addresses less than 16
      Serial.println(address, HEX);                 // Print the address in hexadecimal
    }
  }

  // After scanning, print the results
  if (nDevices == 0)
    Serial.println("No I2C devices found\n");  // No devices found
  else
    Serial.println("done\n");  // Scanning done

  delay(5000);  // Wait 5 seconds before the next scan
}

For Raspberry Pi User

Build the circuit

Raspberry i2c lcd2004 bb.png

Setup I2C

Enable the I2C port of your Raspberry Pi (If you have enabled it, skip this; if you do not know whether you have done that or not, please continue).

Step 1: Run the following command.

sudo raspi-config

Step 2: 3 Interfacing options.


Image282.png

Step 3: P5 I2C.

Image283.png

Step 4: <Yes>, then <Ok> -> <Finish>.

Image284.png

Step 5: Check whether the i2c modules are loaded and active.

lsmod | grep i2c

Step 6: Then the following codes will appear (the number may be different).

i2c_dev                     6276    0
i2c_bcm2708                 4121    0

Step 7: Install i2c-tools.

sudo apt-get install i2c-tools

Step 8: Check the address of the I2C device.

i2cdetect -y 1      # For Raspberry Pi 2 and higher version
i2cdetect -y 0      # For Raspberry Pi 1
    pi@raspberrypi ~ $ i2cdetect -y 1
        0  1  2  3   4  5  6  7  8  9   a  b  c  d  e  f
    00:           -- -- -- -- -- -- -- -- -- -- -- -- --
    10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
    20: -- -- -- -- -- -- -- 27 -- -- -- -- -- -- -- --
    30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
    40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
    50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
    60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
    70: -- -- -- -- -- -- -- --

If there is an I2C device connected, the address of the device will be displayed.

Step 9: Install libi2c-dev or smbus.

For C language users

sudo apt-get install libi2c-dev 

For Python users

sudo pip3 install smbus2

Download and run the code

Step 1: Download the code package.


wget http://wiki.sunfounder.cc/images/3/36/I2c_lcd2004_for_raspberry_pi.zip

Step 2: Extract the package

unzip I2c_lcd2004_for_raspberry_pi.zip

(For C Language Users)

Step 3: If you have not installed wiringPi, then you will need to install it first.

sudo apt-get update
git clone https://github.com/WiringPi/WiringPi
cd WiringPi 
./build

Step 4: You can test whether the wiringPi library is installed successfully or not by the following instruction.

gpio -v

Step 5: Get into the folder of code.

cd ~/I2c_lcd2004_for_raspberry_pi/c

Step 6: Compile.

gcc lcd2004.c -o lcd2004 -lwiringPiDev -lwiringPi

Step 7: Run.

sudo ./lcd2004

(For Python Users)
Step 3: Get into the folder of code.

cd ~/I2c_lcd2004_for_raspberry_pi/python

Step 4: Run.

sudo python lcd2004_show.py

Resources

Arduino I2C LCD2004 Code ZIP.jpg
LiquidCrystal_I2C library ZIP.jpg
Raspberry Pi I2C LCD2004 Code ZIP.jpg
PCF8574T_datasheet PDF.jpg