How to Use an RFID RC522 on Raspberry Pi

From Wiki
Revision as of 03:40, 27 January 2016 by Root (Talk | contribs)

Jump to: navigation, search
RFID0127.png

Setup SPI:

Run raspi-config

sudo raspi-config

Go through: 8 Advanced Options -> A6 SPI->Yes
Then press Enter three times to enable SPI as default settings Select finish and reboot

Install python-dev and git:

sudo apt-get update
sudo apt-get upgrade
sudo apt-get install python-dev git

Wiring:

Name Pin# Pin Name
VCC 1 3V3
RST 22 GPIO25
GND Any Any Ground
MISO 21 GPIO9
MOSI 19 GPIO10
SCK 23 GPIO11
NSS 24 GPIO8
IRQ None None

Install SPI-Py

cd ~
git clone https://github.com/lthiery/SPI-Py.git
cd SPI-Py/
sudo python setup.py install

Get MFRC522-python library

cd ~
git clone https://github.com/mxgxw/MFRC522-python.git
cd MFRC522-python/

Now Run:

# To read card
sudo python Read.py
# To write card
sudo python Read.py