Difference between revisions of "Digital Accelerometer ADXL345 Module"
(Created page with "Digital Accelerometer ADXL345 Module") |
|||
| Line 1: | Line 1: | ||
Digital Accelerometer ADXL345 Module | Digital Accelerometer ADXL345 Module | ||
| + | =='''Introduction'''== | ||
| + | [[adxl345.PNG]]<br> | ||
| + | <P>The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit two’s complement and is accessible through either an SPI (3- or 4-wire) or I2C digital interface.<br> | ||
| + | The ADXL345 is well suited to measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (4 mg/LSB) enables the inclination change measurement by less than 1.0°. And the excellent sensitivity (3.9mg/LSB @2g) provides a high-precision output of up to ±16g.<br> | ||
| + | In this experiment, I2C digital interface is used.<br> | ||
| + | See the following figure for the schematic diagram. There is a 3.3v voltage regulator chip in the circuit, so you can power the module with 5V or 3.3V.<br> | ||
| + | </P> | ||
| + | =='''Features'''== | ||
| + | <p>FEATURES | ||
| + | Ultra low power: 25 to 130 µA at VS = 2.5 V (typ)<br> | ||
| + | Power consumption scales automatically with bandwidth<br> | ||
| + | User selectable fixed 10-bit resolution or 4mg/LSB scale<br> | ||
| + | factor in all g-ranges, up to 13-bit resolution at ±16 g<br> | ||
| + | 32 level output data FIFO minimizes host processor load<br> | ||
| + | Built in motion detection functions<br> | ||
| + | • Tap/Double Tap detection<br> | ||
| + | • Activity/Inactivity monitoring<br> | ||
| + | • Free-Fall detection<br> | ||
| + | Supply and I/O voltage range: 1.8 V to 3.6 V<br> | ||
| + | SPI (3 and 4 wire) and I2C digital interfaces<br> | ||
| + | Flexible interrupt modes – Any interrupt mappable to either<br> | ||
| + | interrupt pin<br> | ||
| + | Measurement ranges selectable via serial command<br> | ||
| + | Bandwidth selectable via serial command<br> | ||
| + | Wide temperature range (-40 to +85°C)<br> | ||
| + | 10,000 g shock survival<br> | ||
| + | Pb free/RoHS compliant<br> | ||
| + | Small and thin: 3 × 5 × 1 mm LGA package</p> | ||
| + | |||
| + | =='''Resource'''== | ||
| + | [http://wiki.sunfounder.cc/images/8/8e/DS1302_datasheet.pdf DS1302_datasheet][[File:PDF.jpg]]<br> | ||
| + | [[]] | ||
Revision as of 03:46, 19 August 2017
Digital Accelerometer ADXL345 Module
Introduction
The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit two’s complement and is accessible through either an SPI (3- or 4-wire) or I2C digital interface.
The ADXL345 is well suited to measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (4 mg/LSB) enables the inclination change measurement by less than 1.0°. And the excellent sensitivity (3.9mg/LSB @2g) provides a high-precision output of up to ±16g.
In this experiment, I2C digital interface is used.
See the following figure for the schematic diagram. There is a 3.3v voltage regulator chip in the circuit, so you can power the module with 5V or 3.3V.
Features
FEATURES
Ultra low power: 25 to 130 µA at VS = 2.5 V (typ)
Power consumption scales automatically with bandwidth
User selectable fixed 10-bit resolution or 4mg/LSB scale
factor in all g-ranges, up to 13-bit resolution at ±16 g
32 level output data FIFO minimizes host processor load
Built in motion detection functions
• Tap/Double Tap detection
• Activity/Inactivity monitoring
• Free-Fall detection
Supply and I/O voltage range: 1.8 V to 3.6 V
SPI (3 and 4 wire) and I2C digital interfaces
Flexible interrupt modes – Any interrupt mappable to either
interrupt pin
Measurement ranges selectable via serial command
Bandwidth selectable via serial command
Wide temperature range (-40 to +85°C)
10,000 g shock survival
Pb free/RoHS compliant
Small and thin: 3 × 5 × 1 mm LGA package
Resource
DS1302_datasheet
[[]]
