Difference between revisions of "AD Converter-ADC0832 Module"

From Wiki
Jump to: navigation, search
(Created page with "=='''Introduction'''== File:Ad1.JPG File:Ad2.png The ADC0832 is an 8-bit successive approximation A/D converters with a serial I/O and configurable input multiplexers...")
 
Line 1: Line 1:
 
=='''Introduction'''==
 
=='''Introduction'''==
[[File:Ad1.JPG]]
+
[[File:Ad converter1.JPG]]<br>
[[File:Ad2.png]]
+
[[File:Ad coverter2.png]]
The ADC0832 is an 8-bit successive approximation A/D converters with a serial I/O and configurable input multiplexers with up to 8 channels. The serial I/O is configured to comply with the NSC MICROWIRE™ serial data exchange standard for easy interface to the COPS™ family of processors, and can interface with standard shift registers or µPs.The 2-channel multiplexers are software configured for single-ended or differential inputs as well as channel assignment. The differential analog voltage input allows increasing the common-mode rejection and offsetting the analog zero input voltage value. In addition, the voltage reference input can be adjusted to allow encoding any smaller analog voltage span to the full 8 bits of resolution.
+
The ADC0832 is an 8-bit successive approximation A/D converters with a serial I/O and configurable input multiplexers with up to 8 channels. The serial I/O is configured to comply with the NSC MICROWIRE™ serial data exchange standard for easy interface to the COPS™ family of processors, and can interface with standard shift registers or µPs.The 2-channel multiplexers are software configured for single-ended or differential inputs as well as channel assignment. The differential analog voltage input allows increasing the common-mode rejection and offsetting the analog zero input voltage value. In addition, the voltage reference input can be adjusted to allow encoding any smaller analog voltage span to the full 8 bits of resolution.<br>
The schematic diagram of the ADC0832 module is as follows:
+
The schematic diagram of the ADC0832 module is as follows:<br>
 +
[[File:Ad coverter3.png]]
  
 +
=='''Features'''==
 +
1) ADC0832 on the module is an 8-bit dual-channel AD converter chip manufactured by NSC.<br>
 +
2) Small size, high compatibility, and high cost-performance ratio<br>
 +
3) PCB size: 1.9 x 4.9 cm<br>
 +
4) Operating frequency: 250KHZ; conversion time: 32Μs<br>
 +
5) TTL/MOS input/output level compatible<br>
 +
6) 0V to 5V input range with single 5V power supply <br>
 +
7) NSC MICROWIRE compatible — direct interface to COPS family processors<br>
 +
8) Easy interface to all microprocessors, or operates “stand-alone<br>
 +
9) Operates ratiometrically or with 5 VDC voltage reference<br>
 +
10) No zero or full-scale adjust required<br>
 +
11) Shunt regulator allows operation with high voltage supplies<br>
 +
12) Remote operation with serial digital data link<br>
 +
13) TTL/MOS input/output compatible<br>
  
Features
+
=='''Typical Application'''==
1) ADC0832 on the module is an 8-bit dual-channel AD converter chip manufactured by NSC.
+
[[File:Ad coverter4.png]]
2) Small size, high compatibility, and high cost-performance ratio
+
3) PCB size: 1.9 x 4.9 cm
+
4) Operating frequency: 250KHZ; conversion time: 32Μs
+
5) TTL/MOS input/output level compatible
+
6) 0V to 5V input range with single 5V power supply
+
7) NSC MICROWIRE compatible — direct interface to COPS family processors
+
8) Easy interface to all microprocessors, or operates “stand-alone
+
9) Operates ratiometrically or with 5 VDC voltage reference
+
10) No zero or full-scale adjust required
+
11) Shunt regulator allows operation with high voltage supplies
+
12) Remote operation with serial digital data link
+
13) TTL/MOS input/output compatible
+
  
Typical Application
+
=='''Resources'''==
 
+
[http://www.lengeek.com/wiki/index.php?title=File:ADC0832_datasheet.pdf ADC0832_datasheet][[File:PDF.jpg]]
 
+
Resources
+
ADC0832 datasheet
+
ADC0832 Test Code for Arduino
+

Revision as of 03:46, 24 March 2016

Introduction

Ad converter1.JPG
Ad coverter2.png The ADC0832 is an 8-bit successive approximation A/D converters with a serial I/O and configurable input multiplexers with up to 8 channels. The serial I/O is configured to comply with the NSC MICROWIRE™ serial data exchange standard for easy interface to the COPS™ family of processors, and can interface with standard shift registers or µPs.The 2-channel multiplexers are software configured for single-ended or differential inputs as well as channel assignment. The differential analog voltage input allows increasing the common-mode rejection and offsetting the analog zero input voltage value. In addition, the voltage reference input can be adjusted to allow encoding any smaller analog voltage span to the full 8 bits of resolution.
The schematic diagram of the ADC0832 module is as follows:
Ad coverter3.png

Features

1) ADC0832 on the module is an 8-bit dual-channel AD converter chip manufactured by NSC.
2) Small size, high compatibility, and high cost-performance ratio
3) PCB size: 1.9 x 4.9 cm
4) Operating frequency: 250KHZ; conversion time: 32Μs
5) TTL/MOS input/output level compatible
6) 0V to 5V input range with single 5V power supply
7) NSC MICROWIRE compatible — direct interface to COPS family processors
8) Easy interface to all microprocessors, or operates “stand-alone
9) Operates ratiometrically or with 5 VDC voltage reference
10) No zero or full-scale adjust required
11) Shunt regulator allows operation with high voltage supplies
12) Remote operation with serial digital data link
13) TTL/MOS input/output compatible

Typical Application

Ad coverter4.png

Resources

ADC0832_datasheetPDF.jpg