Difference between revisions of "6D-BOX FAQ"
(Created page with "The Flysky has 6 channels plus an optional DC power in, the 6DBOX flight controller has the same number of pins but I would like to be sure that the last (optional DC power) i...") |
|||
| Line 1: | Line 1: | ||
| − | + | ==Q1: How to Connect the Drone 6D-BOX and Receiver FlySky FS-iA6== | |
| − | + | ''Since the 6D-Box quadcopter kit does not include the receiver and radio transmitter, you may need some instructions on how to apply them with the kit. Here’s some guide on connecting the drone and receiver. (For more information, please refer to our user manual for the kit under LEARN.)''<br> | |
| + | A: If the CH1 of your receiver is the leftmost and there are 1 to 7 channels, just insert the CH1 pin on the receiver into the No.7 pin header on the flight controller, CH2 to No.6 ,CH3 to No.5, Ch4 to No.4, CH5 to No.3, Ch6 to No.2 and CH7 to No.1 as shown below.<br> | ||
| + | |||
| + | |||
| + | |||
| + | ''Note: B/VCC of the receiver is the channel for pairing and power input and will not function after connecting to the 6D-BOX.''<br> | ||
| + | ===<font color="red">Check the following instructions for using the B/VCC channel</font>=== | ||
| + | The binding of the receiver with the transmitter is already done when it's manufactured. So you DO NOT need to bind again. But if you want to use them with other radio transmitters or receivers, then you need to re-bind. Please take the following steps before further operations: <br> | ||
Revision as of 07:03, 18 May 2017
Q1: How to Connect the Drone 6D-BOX and Receiver FlySky FS-iA6
Since the 6D-Box quadcopter kit does not include the receiver and radio transmitter, you may need some instructions on how to apply them with the kit. Here’s some guide on connecting the drone and receiver. (For more information, please refer to our user manual for the kit under LEARN.)
A: If the CH1 of your receiver is the leftmost and there are 1 to 7 channels, just insert the CH1 pin on the receiver into the No.7 pin header on the flight controller, CH2 to No.6 ,CH3 to No.5, Ch4 to No.4, CH5 to No.3, Ch6 to No.2 and CH7 to No.1 as shown below.
Note: B/VCC of the receiver is the channel for pairing and power input and will not function after connecting to the 6D-BOX.
Check the following instructions for using the B/VCC channel
The binding of the receiver with the transmitter is already done when it's manufactured. So you DO NOT need to bind again. But if you want to use them with other radio transmitters or receivers, then you need to re-bind. Please take the following steps before further operations:
