Raspberry pi case with 3.5" touch screen（480x320）
Introduction
Complete your Pi setup with our custom designed faceplate specifically designed to fit your 3.5" touch screen and Raspberry Pi 4 B case base!
High quality ABS material, this case base is a simple way to enclose your 3.5" touch screen and Raspberry Pi 4 B safely and in style.
The 3.5" touch screen is also included in this kit, it has a high resolution 480*320 and a high refreshing rate, nearly 40-50 frames per second, thus giving you the best fantastic game-play and vedio-watching experience.
There is a fan connector on the back of the screen, which allows you to cool down the Raspberry Pi while using the screen.
Feature List
- ABS material
- Size: 91mm*62mm*34mm
- For Raspberry Pi 4 Model B1 x ABS Case
Preparation
Product List
- 1 x 3.5inch Touch Screen
- 1 x Touch Pen
- 1 x Cooling Fan
- Several Thermal Silicone Pads
- Several Mounting Accessories
Required Preparation
- Raspberry Pi 4B
Hardware Operation
a. Assemble 1 & 2 as follows.
b. Place RPi 4B on the part 4 and screw the part 4 and RPi with the part 3.
c. Enclose the finished parts with the part 6.
d. Connect the fan with RPi and stick the part 5 on the indicated position as shown.
e. Cover the part 2 on the part 6 and fasten them.
f. Remove the pad from the part 7 and stick them on the part 4 to protect the enclosure.
