3.5 Inch LCD Touch Screen Monitor for Raspberry Pi

From Wiki
Revision as of 10:26, 17 June 2016 by Root (Talk | contribs) (Touch Screen Calibration)

Jump to: navigation, search

LCD1.jpg

Application

This 3.5 Inch LCD touch screen monitor can be applied to Raspberry Pi 1 model B and B+, 2 model B and 3 model B.

Operation Procedures

LCD2.jpg

Download the simplified installation package below (or here). Transfer it to the Raspberry Pi.

Finish the installation with Installation Guide which comes along with the product.

Touch Screen Calibration

1.If there's any deviations of the touch screen, you need to calibrate it. On the touch screen, use a mouse, to click Menu -> Preference -> Calibrate Touchscreen

LCD3.jpg

2.Then the screen will show 4 points. You need to tap them one by one to calibrate.

LCD4.jpg

3.After calibration, you will get the following. Copy the contents in the red box.

LCD5.jpg 

4.In the terminal, type in

sudo nano /etc/X11/xorg.conf.d/99-calibration.conf

Paste what you have copied just now to the file

Press Ctrl + X, select Y, and then press Enter to save the file

5.In the terminal, type in

sudo reboot

After rebooting, the calibration will be done.

LCD-showZIP.jpg