Q250
Introduction
The realization of FPV flying starts from having a SunFounder Q250 aircraft. The SunFounder Q250 quadcopter is tailored for the hobbyists for FPV flying, featuring stability, flexibility and activity. You can realize a stable flight in a high or low altitude or in a forest with this aircraft. The skid landing damping sponge tubes bound onto the motors help stablize the flight and protect the frame through increasing the buffer between the frame and the land when the aircraft is landing.
It runs the OpenPilot firmware of the flight controller and the electronic speed controllers. This kit is designed to meet the hobbyists’ higher requirement of flying the aircraft. You can realize a stable flight in a small space or a rapid 3D flight based on your own configuration and parameter setting.
Featrues
- The Q250 quadcopter is tailored for hobbyists and beginners for FPV flying.
- It is a X-Shape quadcopter, more flexible and efficient than the H-Shape.
- It runs the firmware of CC3D flight controller, working with the EMAX 2204 motor and the Hobbywing ESC.
- Weight: 476 g ; Duration of flight: 11 minutes；Working voltage: 11.1V
- The tutorial of the software debugging and the assembling videos of the aircraft are provided for you.
Technical Details
Duration of flight: 11 minutes.
Weight：476g
Axis distance：250mm
Motor：EMAX MT2204 2300KV
Working voltage:11.1V
Battery capacity: 1300mAH
Electronic Speed Controller：EMAX Simon 15A brushless , UBEC not included
Maximum power：150W
Maximum tension: 440g
Related links
1.Installing the Ground Control Station (GCS),please refer to this link:
2. For the assembling videos, please refer to this link:
https://www.sunfounder.com/video/category/?cat=38
3.For the remote control, you are recommended to refer to this link:
https://www.sunfounder.com/rc.html
4.The Q250 quadcopter kit uses the 6040 propellers blades. If you want to experience a violent 3D flight, the 5045 propeller blades are needed. For them, you are recommended to refer to this link:
https://www.sunfounder.com/5045propeller.html
5.For the camera kit, you are recommended to refer to this link:
https://www.sunfounder.com/drone/flight-camera/minicamera.html
https://www.sunfounder.com/drone/fpv-image-transceiver-kit-with-700tvl-hd-camera-mini-ts5823-32-channel-av-transmitter-5-8g-mushroom-antenna-for-quadcopter-multirotor-aircraft.html
6. For the FPV TFT LCD, you are recommended to refer to this link:
https://www.sunfounder.com/drone/fpv-lcd.html
7. For the FPV Image Transceiver Kit, you are recommended to refer to this link:
