Difference between revisions of "Replace HDMI cable tutorial"
From Wiki
| Line 1: | Line 1: | ||
# Place the Raspad on the reverse side and Open the Raspberry Pi cover. | # Place the Raspad on the reverse side and Open the Raspberry Pi cover. | ||
| + | #Uncover the silicone pad and unscrew the screw | ||
| + | #Repeat step 2 until all is complete | ||
| + | #Open the back cover | ||
| + | #Uncover the tape | ||
| + | #Unscrew the screw | ||
| + | #Unplug HDMI | ||
| + | #Replace with new HDMI | ||
| + | #Note the HDMI placement path | ||
| + | #Screw on | ||
| + | #Place HDMI in the correct position | ||
| + | #Note that the line is placed in the correct position | ||
| + | #Screw all the screws and attach all silicone pads | ||
| + | #Complete HDMI replacement | ||
Revision as of 02:28, 15 August 2018
- Place the Raspad on the reverse side and Open the Raspberry Pi cover.
- Uncover the silicone pad and unscrew the screw
- Repeat step 2 until all is complete
- Open the back cover
- Uncover the tape
- Unscrew the screw
- Unplug HDMI
- Replace with new HDMI
- Note the HDMI placement path
- Screw on
- Place HDMI in the correct position
- Note that the line is placed in the correct position
- Screw all the screws and attach all silicone pads
- Complete HDMI replacement
