Difference between revisions of "SF-C01/02 Micro FPV CAMERA"

From Wiki
Jump to: navigation, search
(Button Function)
(Image Transmission Module + Micro FPV Camera)
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
  
[[File:SF-C01-02-2.png]][[File:SF-C01-02-6.png]][[File:SF-C01-02-3.png]][[File:SF-C01-02-8.png]][[File:SF-C01-02-4.png]][[File:SF-C01-02-7.png]][[File:SF-C01-02-5.png]]<br>
+
[[File:SF-C01-02-20.png]][[File:SF-C01-02-8.png]][[File:SF-C01-02-21.png]]<br>
  
 
==Image Transmission Module + Micro FPV Camera==
 
==Image Transmission Module + Micro FPV Camera==
Line 8: Line 8:
 
Here is its frequency and channel: <br>
 
Here is its frequency and channel: <br>
  
[[File:SF-C01-02-1.png]]<br>
+
[[File:SF-C01-02-23.png]]<br>
  
 
[[File:SF-C01-02-9.png]]<br>
 
[[File:SF-C01-02-9.png]]<br>

Latest revision as of 03:27, 26 May 2017

SF-C01-02-20.pngSF-C01-02-8.pngSF-C01-02-21.png

Image Transmission Module + Micro FPV Camera

This FPV camera is a micro-size and ultra-lightweight all-in-one device, integrating a 5.8G 25mW image transmission module of 48 frequency points and a 600-TVline (TVL) camera. It’s already soldered with a dipole whip antenna (SF-C01) or a 4-Leaf-Clover (SF-C02) Antenna, with NTSC and PAL available.
In addition, a 1S lithium battery is enough for powering, needless of the boost module. The FPV camera has the advantage of low power consumption and is easy to install, which is perfect for mini racing drones/aircrafts. What's more fantastic is that, you can get a good performance of image transmission even when it is racing on the other side of the wall!
Note: This guide is suitable for both the SF-C01 and SF-C02 Micro FPV Camera.
Here is its frequency and channel:

SF-C01-02-23.png

SF-C01-02-9.png

Features

FPV tuned light camera
Comes with video transmission module
Miniature and lightweight design
Wide lens angle120°
SF-C01, 3.4g
SF-C02, 4.0g
5.8G, 48ch with Raceband

Button Function

Front button:
Press and hold the button for more than 2 seconds to switch between NTSC and PAL.
Press the button for no more than one second to get the reverse image.


Back button:
Press and hold the button for more than 2 seconds to choose the frequency group.
Press the button for no more than one second to exchange frequency.