Difference between revisions of "The touch screen does not work properly FAQ"
From Wiki
(→solution) |
|||
| Line 4: | Line 4: | ||
1. Download and unzip the file "ilitekUSBUpgradeTool.zip" to your computer.<br> | 1. Download and unzip the file "ilitekUSBUpgradeTool.zip" to your computer.<br> | ||
2. Run the application software "ilitekUSBUpgradeTool_v2.3.5.7.exe".<br> | 2. Run the application software "ilitekUSBUpgradeTool_v2.3.5.7.exe".<br> | ||
| − | 3. Plug the USB on the left side of the RasPad into your computer. Boot RasPad | + | 3. Plug the USB on the left side of the RasPad into your computer. Boot RasPad .<br> |
4. Update the driver according to the file "ILITEK_TP_FW_UPGRADE_TOOL_v2.0.0.0_ENG.pdf".<br> | 4. Update the driver according to the file "ILITEK_TP_FW_UPGRADE_TOOL_v2.0.0.0_ENG.pdf".<br> | ||
5. After the update is complete, you can install Rasberry Pi and use RasPad.<br> | 5. After the update is complete, you can install Rasberry Pi and use RasPad.<br> | ||
Revision as of 02:56, 12 September 2018
Solution steps
Solve the problem that the touch screen does not work properly (but not for the case where the touch screen does not work). For example, a blue selection box will appear in different places on the screen, and a character delay will occur when using the virtual keyboard. etc.
solution:
1. Download and unzip the file "ilitekUSBUpgradeTool.zip" to your computer.
2. Run the application software "ilitekUSBUpgradeTool_v2.3.5.7.exe".
3. Plug the USB on the left side of the RasPad into your computer. Boot RasPad .
4. Update the driver according to the file "ILITEK_TP_FW_UPGRADE_TOOL_v2.0.0.0_ENG.pdf".
5. After the update is complete, you can install Rasberry Pi and use RasPad.
