Difference between revisions of "The touch screen does not work properly FAQ"
From Wiki
(→solution) |
|||
| Line 1: | Line 1: | ||
| − | ==''' | + | =='''Solution steps'''== |
Solve the problem that the touch screen does not work properly (but not for the case where the touch screen does not work). For example, a blue selection box will appear in different places on the screen, and a character delay will occur when using the virtual keyboard. etc.<br> | Solve the problem that the touch screen does not work properly (but not for the case where the touch screen does not work). For example, a blue selection box will appear in different places on the screen, and a character delay will occur when using the virtual keyboard. etc.<br> | ||
solution:<br> | solution:<br> | ||
Revision as of 02:39, 7 September 2018
Solution steps
Solve the problem that the touch screen does not work properly (but not for the case where the touch screen does not work). For example, a blue selection box will appear in different places on the screen, and a character delay will occur when using the virtual keyboard. etc.
solution:
1. Download and unzip the file "ilitekUSBUpgradeTool.zip" to your computer.
2. Run the application software "ilitekUSBUpgradeTool_v2.3.5.7.exe".
3. Plug the USB on the left side of the RasPad into your computer. Boot RasPad and don't install the Raspberry Pi.
4. Update the driver according to the file "ILITEK_TP_FW_UPGRADE_TOOL_v2.0.0.0_ENG.pdf".
5. After the update is complete, you can install Rasberry Pi and use RasPad.
