Difference between revisions of "SF-C01/02 Micro FPV CAMERA"
| Line 7: | Line 7: | ||
!scope="col" |5.8G 25mW 48CH RF Camera | !scope="col" |5.8G 25mW 48CH RF Camera | ||
|- | |- | ||
| − | | | + | |Frequency Band |
| − | | | + | |5362~5945 MHz |
| + | |- | ||
| + | |Number of Channels | ||
| + | |48 | ||
| + | |- | ||
| + | |Frequency-selecting Mode | ||
| + | |Touch Switch | ||
| + | |- | ||
| + | |Channel/Frequency Group Indication | ||
| + | |CH1~CH8 indicated by 8 LEDs; A~F frequency group by 6 LEDs | ||
| + | |- | ||
| + | |Transmission Power | ||
| + | |13±1 dBm | ||
| + | |- | ||
| + | |Frequency Control | ||
| + | |PLL | ||
| + | |- | ||
| + | |Harmonics | ||
| + | |Max 50 dBm | ||
|} | |} | ||
Revision as of 01:35, 24 May 2017
Image Transmission Module + Micro FPV Camera
This FPV camera is a micro-size and ultra-lightweight all-in-one device, integrating a 5.8G 25mW image transmission module of 48 frequency points and a 600-TVline (TVL) camera. It’s already soldered with a dipole whip antenna (SF-C01) or a 4-Leaf-Clover (SF-C02) Antenna, with NTSC and PAL available.
In addition, a 1S lithium battery is enough for powering, needless of the boost module. The FPV camera has the advantage of low power consumption and is easy to install, which is perfect for mini racing drones/aircrafts. What's more fantastic is that, you can get a good performance of image transmission even when it is racing on the other side of the wall!
Note: This guide is suitable for both the SF-C01 and SF-C02 Micro FPV Camera.
Here is its frequency and channel:
| 5.8G 25mW 48CH RF Camera | |
|---|---|
| Frequency Band | 5362~5945 MHz |
| Number of Channels | 48 |
| Frequency-selecting Mode | Touch Switch |
| Channel/Frequency Group Indication | CH1~CH8 indicated by 8 LEDs; A~F frequency group by 6 LEDs |
| Transmission Power | 13±1 dBm |
| Frequency Control | PLL |
| Harmonics | Max 50 dBm |
