View source for Test the PiSmart fuse tutorial

'''1. Turn the multimeter to the position shown below.'''<br/>
[[File:piSmarFuseTest1.jpg]]<br/>
'''2. Use the red and black test leads of the multimeter to test the on/off <br/> of the components in the figure below. The red and black test leads<br/> are respectively in contact with the two ends of the component (the<br/> component has "P" written on it).<br/>
When the multimeter has a sound, it indicates that PiSmart's fuse is<br/> good, if not, it indicates that PiSmart's fuse is bad.<br/>'''
[[File:piSmarFuseTest2.jpg]]<br/>
END