View source for Raspberry pi 2.13'' e ink display（250x122）


== Description ==
[[File:Sc011 4.jpg]]
<br>
A low-energy, high-falutin, electronic paper (ePaper / eInk / EPD) display for your Pi, in two different colour schemes: black/white.
<br>
This 250x122 pixel eInk display is perfect for displaying simple graphics and clearly rendered text. It has low power consumption, a wide viewing angle, and is readable in bright sunlight. After power is off, the last display can be kept.
<br>
Everything is completely assembled, no soldering is required, you can plug the eInk display directly into the GPIO pin of the Raspberry Pi. It‘s also has an 8-pin PH2.0 socket that can be connected to other development boards.
<br>
It'll work with any 40-pin version of the Pi, including Pi Zero and Pi Zero W.

== Features ==

* 2.13'' eInk Display
* Resolution: 250*122
* Operating Voltage: 3.3V/5V
* Communication Interface: SPI
* Visual Angle: 170°
* Gray Scale: 2
* Display Color: Black and White
* Dimension: 65mm*30.2mm
* Dot Pitch: 0.194*0.194
* Refresh Power: 26.5mV（typ.）
* For Raspberry Pi 4B/3B/3B+/2B/1B+/Zero W (any Pi with 2x20 connector)

== Package Including ==

* 1 x 2.13'' eInk Display
* 1 x 8pin Female Anti-reverse Cable
* Several Mounting Cable

== Operations Guide ==
<ol>
    <li>sudo raspi-config</li>
[[File:Sc011 2.png]]
</ol>