View source for Raspberry pi case with 3.5" touch screen（480x320）

=Introduction=

[[File:Sc003-9.png]]<br>
Complete your Pi setup with our custom designed faceplate specifically designed to fit your 3.5" touch screen and Raspberry Pi 4 B case base!  <br>
High quality ABS material, this case base is a simple way to enclose your 3.5'' touch screen and Raspberry Pi 4 B safely and in style. <br>
The 3.5'' touch screen is also included in this kit, it has a high resolution 480*320 and a high refreshing rate, nearly 40-50 frames per second, thus giving you the best fantastic game-play and vedio-watching experience.<br>
There is a fan connector on the back of the screen, which allows you to cool down the Raspberry Pi while using the screen.<br>


=Feature List=
* ABS material
* Size: 91mm*62mm*34mm
* For Raspberry Pi 4 Model B1 x ABS Case


=Preparation=
'''Product List'''
* 1 x 3.5inch Touch Screen
* 1 x Touch Pen
* 1 x Cooling Fan
* Several Thermal Silicone Pads
* Several Mounting Accessories

'''Required Preparation''' 
*Raspberry Pi 4B


=Hardware Operation=

[[File:Sc003-1.png]]<br>

a. Assemble 1 & 2 as follows. <br>

[[File:Sc003-2.png]]<br>

b. Place RPi 4B on the part 4 and screw the part 4 and RPi with the part 3.<br>

[[File:Sc003-3.png]]<br>

c. Enclose the finished parts with the part 6. <br>

[[File:Sc003-5.png]]<br>

d. Connect the fan with RPi and stick the part 5 on the indicated position as shown. <br>

[[File:Sc003-6.png]]<br>

e. Cover the part 2 on the part 6 and fasten them. <br>

[[File:Sc003-7.png]]<br>

f. Remove the pad from the part 7 and stick them on the part 4 to protect the enclosure.<br>

[[File:Sc003-8.png]]<br>