View source for OLED-SSD1306 Module


=='''Introduction'''==

[[File:ssd1.jpg]]
  
SSD1306 is a single-chip CMOS OLED/PLED driver with controller for organic / polymer light emitting diode dot-matrix graphic display system. It consists of 128 segments and 64commons. This IC is designed for Common Cathode type OLED panel. The SSD1306 embeds with contrast control, display RAM and oscillator, which reduces the number of external components and power consumption. It has 256-step brightness control.  It is suitable for many compact portable applications, such as Smart watch，eal-time image display of camera on smart car，Battery management device，etc.

=='''Schematic'''==

[[File:ssd2.jpg]]

=='''Features'''==
*For OLED-SSD1306, a more elaborate and beautiful screen than LCD, with more functions

*High contrast, thus supporting clear display With no need of backlight 

*Working voltage: 2.7V - 5.5V; PCB size: 2.8 x 3.2cm

*Standard double-sided printed circuit board, 1.16mm thick, with an elegant layout, 3-mm holes at two corners for easy fixing
 
*Low power consumption: 0.04W during normal operation

=='''Text'''==
'''Step1:'''Connecting circuit

:::::::SSD1306       -------     Arduino Uno/Mega2560
:::::::: GND         ---------         GND
::::::::VCC         -------            5V
:::::::: SCL          -------          A5 Uno/pin21 Mega2560
:::::::: SDA          -------          A4 Uno/pin20 Mega2560

'''Step2:'''Install the Arduino IDE in your computer.For detailed steps,refer to

<font color="blue">https://www.sunfounder.com/wiki/index.php?title=Install_Arduino_Software</font>

'''Step3:'''Add U8glib library.

1) Through the links at the bottom of the page to '''download''' U8glib.zip and unzip. 

2)the Arduino IDE, import the library from the "'''Add Library'''" Menu.

[[File:ssd3.jpg]]

3) Find the '''u8glib''' folder you just extracted，clink '''open'''.

[[File:ssd4.jpg]]

'''Step4：'''Open '''Graphics_Test.ino''', Before clicking the Upload  icon, set the '''Port''' and '''Board''' under '''Tools''' menu.Then upload the code to the board<br>

=='''Experimental phenomenon'''==

[[File:ssd5.jpg]]

=='''Resource'''==
[https://www.sunfounder.com/wiki/index.php?title=File:U8glib.zip U8glib.zip][[File:ZIP.jpg]]<br>
[https://www.sunfounder.com/wiki/index.php?title=File:SSD1306_datasheet.pdf SSD1306_datasheet][[File:PDF.jpg]]