Difference between revisions of "The touch screen does not work properly FAQ"

From Wiki
Jump to: navigation, search
(One intermediate revision by the same user not shown)
Line 1: Line 1:
=='''solution'''==
+
=='''Solution steps'''==
 
Solve the problem that the touch screen does not work properly (but not for the case where the touch screen does not work). For example, a blue selection box will appear in different places on the screen, and a character delay will occur when using the virtual keyboard. etc.<br>
 
Solve the problem that the touch screen does not work properly (but not for the case where the touch screen does not work). For example, a blue selection box will appear in different places on the screen, and a character delay will occur when using the virtual keyboard. etc.<br>
 
solution:<br>
 
solution:<br>
 
1. Download and unzip the file "ilitekUSBUpgradeTool.zip" to your computer.<br>  
 
1. Download and unzip the file "ilitekUSBUpgradeTool.zip" to your computer.<br>  
 
2. Run the application software "ilitekUSBUpgradeTool_v2.3.5.7.exe".<br>
 
2. Run the application software "ilitekUSBUpgradeTool_v2.3.5.7.exe".<br>
3. Plug the USB on the left side of the RasPad into your computer. Boot RasPad and don't install the Raspberry Pi.<br>
+
3. Plug the USB on the left side of the RasPad into your computer. Boot RasPad .<br>
 
4. Update the driver according to the file "ILITEK_TP_FW_UPGRADE_TOOL_v2.0.0.0_ENG.pdf".<br>
 
4. Update the driver according to the file "ILITEK_TP_FW_UPGRADE_TOOL_v2.0.0.0_ENG.pdf".<br>
 
5. After the update is complete, you can install Rasberry Pi and use RasPad.<br>
 
5. After the update is complete, you can install Rasberry Pi and use RasPad.<br>

Revision as of 02:56, 12 September 2018

Solution steps

Solve the problem that the touch screen does not work properly (but not for the case where the touch screen does not work). For example, a blue selection box will appear in different places on the screen, and a character delay will occur when using the virtual keyboard. etc.
solution:
1. Download and unzip the file "ilitekUSBUpgradeTool.zip" to your computer.
2. Run the application software "ilitekUSBUpgradeTool_v2.3.5.7.exe".
3. Plug the USB on the left side of the RasPad into your computer. Boot RasPad .
4. Update the driver according to the file "ILITEK_TP_FW_UPGRADE_TOOL_v2.0.0.0_ENG.pdf".
5. After the update is complete, you can install Rasberry Pi and use RasPad.

Resource

ilitekUSBUpgradeTool.zip ZIP.jpg