Difference between revisions of "Test the PiSmart fuse tutorial"

From Wiki
Jump to: navigation, search
 
Line 1: Line 1:
'''1. Turn the multimeter to the position shown below.'''
+
'''1. Turn the multimeter to the position shown below.'''<br/>
[[File:piSmarFuseTest1.jpg]]'''Bold text'''
+
[[File:piSmarFuseTest1.jpg]]<br/>
'''2. Use the red and black test leads of the multimeter to test the on/off of the components in the figure below. The red and black test leads are respectively in contact with the two ends of the component (the component has "P" written on it).
+
'''2. Use the red and black test leads of the multimeter to test the on/off <br/> of the components in the figure below. The red and black test leads<br/> are respectively in contact with the two ends of the component (the<br/> component has "P" written on it).<br/>
When the multimeter has a sound, it indicates that PiSmart's fuse is good, if not, it indicates that PiSmart's fuse is bad.'''
+
When the multimeter has a sound, it indicates that PiSmart's fuse is<br/> good, if not, it indicates that PiSmart's fuse is bad.<br/>'''
[[File:piSmarFuseTest2.jpg]]
+
[[File:piSmarFuseTest2.jpg]]<br/>
 
END
 
END

Latest revision as of 07:44, 13 November 2018

1. Turn the multimeter to the position shown below.
PiSmarFuseTest1.jpg
2. Use the red and black test leads of the multimeter to test the on/off
of the components in the figure below. The red and black test leads
are respectively in contact with the two ends of the component (the
component has "P" written on it).
When the multimeter has a sound, it indicates that PiSmart's fuse is
good, if not, it indicates that PiSmart's fuse is bad.
PiSmarFuseTest2.jpg
END