Difference between revisions of "TCS34725 RGB Color Sensor Module"

From Wiki
Jump to: navigation, search
(Introduction of Pins)
(Introduction of Pins)
Line 59: Line 59:
 
|Supply voltage.
 
|Supply voltage.
 
|}
 
|}
 +
 +
== '''Principle''' ==
 +
[[File:TCS34725_3.jpg]]

Revision as of 08:11, 14 October 2019

Product Introduction

TCS34725 1.jpg TCS34725 2.jpg
The TCS34725 device provides a digital return of red, green, blue (RGB), and clear light sensing values. An IR blocking filter, integrated on-chip and localized to the color sensing photodiodes, minimizes the IR spectral component of the incoming light and allows color measurements to be made accurately. The high sensitivity, wide dynamic range, and IR blocking filter make the TCS34725 an ideal color sensor solution for use under varying lighting conditions and through attenuating materials.

Main Features

  1. Red, Green, Blue (RGB), and Clear Light Sensing with IR Blocking Filter
    • Programmable Analog Gain and Integration Time
    • 3,800,000: 1 Dynamic Range
    • Very High Sensitivity — Ideally Suited for Operation Behind Dark Glass
  2. Maskable Interrupt
    • Programmable Upper and Lower Thresholds with Persistence Filter
  3. Power Management
    • Low Power — 2.5-μA Sleep State
    • 65-μA Wait State with Programmable Wait State Time from 2.4 ms to > 7 Seconds
  4. I 2 C Fast Mode Compatible Interface
    • Data Rates up to 400 kbit/s
    • Input Voltage Levels Compatible with V DD or 1.8 V Bus
  5. Register Set and Pin Compatible with the TCS3x71 Series
  6. Small 2 mm x 2.4 mm Dual Flat No-Lead (FN) Package

Introduction of Pins

Pin Introduction
LED Interrupt output when the level is low.
INT Interrupt – open drain(active low).
SDA I2C serial clock input terminal – clock signal for I2C serial data.
SCL I2C serial data I/O terminal – serial data I/O for I2C.
3V3 To 3v3
GND Power supply ground. All voltages are referenced to GND.
VIN Supply voltage.

Principle

TCS34725 3.jpg