Difference between revisions of "Raspberry pi case with 3.5" touch screen(480x320)"

From Wiki
Jump to: navigation, search
(Created page with "1515165165189981")
 
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
1515165165189981
+
=Introduction=
 +
 
 +
[[File:Sc003-9.png]]<br>
 +
Complete your Pi setup with our custom designed faceplate specifically designed to fit your 3.5" touch screen and Raspberry Pi 4 B case base!  <br>
 +
High quality ABS material, this case base is a simple way to enclose your 3.5" touch screen and Raspberry Pi 4 B safely and in style. <br>
 +
The 3.5" touch screen is also included in this kit, it has a high resolution 480*320 and a high refreshing rate, nearly 40-50 frames per second, thus giving you the best fantastic game-play and vedio-watching experience.<br>
 +
There is a fan connector on the back of the screen, which allows you to cool down the Raspberry Pi while using the screen.<br>
 +
 
 +
 
 +
=Feature List=
 +
* ABS material
 +
* Size: 91mm*62mm*34mm
 +
* For Raspberry Pi 4 Model B1 x ABS Case
 +
 
 +
 
 +
=Preparation=
 +
'''Product List'''
 +
* 1 x 3.5inch Touch Screen
 +
* 1 x Touch Pen
 +
* 1 x Cooling Fan
 +
* Several Thermal Silicone Pads
 +
* Several Mounting Accessories
 +
 
 +
'''Required Preparation'''
 +
*Raspberry Pi 4B
 +
 
 +
 
 +
=Hardware Operation=
 +
 
 +
[[File:Sc003-1.png]]<br>
 +
 
 +
a. Assemble 1 & 2 as follows. <br>
 +
 
 +
[[File:Sc003-2.png]]<br>
 +
 
 +
b. Place RPi 4B on the part 4 and screw the part 4 and RPi with the part 3.<br>
 +
 
 +
[[File:Sc003-3.png]]<br>
 +
 
 +
c. Enclose the finished parts with the part 6. <br>
 +
 
 +
[[File:Sc003-5.png]]<br>
 +
 
 +
d. Connect the fan with RPi and stick the part 5 on the indicated position as shown. <br>
 +
 
 +
[[File:Sc003-6.png]]<br>
 +
 
 +
e. Cover the part 2 on the part 6 and fasten them. <br>
 +
 
 +
[[File:Sc003-7.png]]<br>
 +
 
 +
f. Remove the pad from the part 7 and stick them on the part 4 to protect the enclosure.<br>
 +
 
 +
[[File:Sc003-8.png]]<br>

Latest revision as of 02:59, 8 April 2020

Introduction

Sc003-9.png
Complete your Pi setup with our custom designed faceplate specifically designed to fit your 3.5" touch screen and Raspberry Pi 4 B case base!
High quality ABS material, this case base is a simple way to enclose your 3.5" touch screen and Raspberry Pi 4 B safely and in style.
The 3.5" touch screen is also included in this kit, it has a high resolution 480*320 and a high refreshing rate, nearly 40-50 frames per second, thus giving you the best fantastic game-play and vedio-watching experience.
There is a fan connector on the back of the screen, which allows you to cool down the Raspberry Pi while using the screen.


Feature List

  • ABS material
  • Size: 91mm*62mm*34mm
  • For Raspberry Pi 4 Model B1 x ABS Case


Preparation

Product List

  • 1 x 3.5inch Touch Screen
  • 1 x Touch Pen
  • 1 x Cooling Fan
  • Several Thermal Silicone Pads
  • Several Mounting Accessories

Required Preparation

  • Raspberry Pi 4B


Hardware Operation

Sc003-1.png

a. Assemble 1 & 2 as follows.

Sc003-2.png

b. Place RPi 4B on the part 4 and screw the part 4 and RPi with the part 3.

Sc003-3.png

c. Enclose the finished parts with the part 6.

Sc003-5.png

d. Connect the fan with RPi and stick the part 5 on the indicated position as shown.

Sc003-6.png

e. Cover the part 2 on the part 6 and fasten them.

Sc003-7.png

f. Remove the pad from the part 7 and stick them on the part 4 to protect the enclosure.

Sc003-8.png