Raspberry pi 2.13'' e ink display（250x122）
A low-energy, high-falutin, electronic paper (ePaper / eInk / EPD) display for your Pi, in two different colour schemes: black/white.
This 250x122 pixel eInk display is perfect for displaying simple graphics and clearly rendered text. It has low power consumption, a wide viewing angle, and is readable in bright sunlight. After power is off, the last display can be kept.
Everything is completely assembled, no soldering is required, you can plug the eInk display directly into the GPIO pin of the Raspberry Pi. It‘s also has an 8-pin PH2.0 socket that can be connected to other development boards.
It'll work with any 40-pin version of the Pi, including Pi Zero and Pi Zero W.
- 2.13 eInk Display
- Resolution: 250*122
- Operating Voltage: 3.3V/5V
- Communication Interface: SPI
- Visual Angle: 170°
- Gray Scale: 2
- Display Color: Black and White
- Dimension: 65mm*30.2mm
- Dot Pitch: 0.194*0.194
- Refresh Power: 26.5mV（typ.）
- For Raspberry Pi 4B/3B/3B+/2B/1B+/Zero W (any Pi with 2x20 connector)
1 x 2.13 eInk Display 1 x 8pin Female Anti-reverse Cable Several Mounting Cable