Raspberry Pi 3.5" TFT Resistive Touchscreen
Is this not the cutest, little display for the Raspberry Pi? It features a 3.5" display with 480x320 16-bit color pixels and a resistive touch. The screen has a high refreshing rate, nearly 50-60 frames per second, thus giving you the best fantastic game-play and vedio-watching.
Best of all, there are expansion terminals that added behind the screen's PCB, allowing 3.5-inch screens and fans to be used simultaneously. Thus as the screen is working, the fan cools the Raspberry Pi's CPU at the same time, making the system run more smoothly.
This TFT 3.5" is designed to fit nicely onto the Raspberry Pi 4B/3B/3B+/3A+/Zero W. It comes fully assembled and ready to plug into your Pi!
- LCD Type: TFT
- LCD Interface: SPI
- Resistive Touch Screen
- XPT2046 Touch Screen Controller
- 65536 Colors
- Backlight LED
- Resolution: 480x320
- Aspect Ratio: 4:3
- SPI Diver Speed: 16MHz
- 1 x 3.5 Touchscreen HAT
- 1 x Touch Pen
- 1. Raspberry Pi 2B/3B/3B+/4B
- 2. Raspberry Pi Power Adapter
- 3. Network Cable (it's for RPi system installation and you can ignore it if you have finished.)
- 4. Card Reader: (it's for RPi system installation and you can ignore it if you have finished.)
- 5. SD card (a recommended 8g and higher one) (it's for RPi system installation and you can ignore it if you have finished.)
Align the pins on the right to connect the RPi with the screen; meanwhile, insert the SD card and plug the power cable.
Step1: Download RPi system
1. Click in to access the Raspberry Pi official website https://www.raspberrypi.org/downloads/,and then select to download the image you need according to your compute types (windows/MAC/Ubuntu).
2. After downloading, click to start the installation of imager.exe. The RPi Imager page appears when the installation is done. You need to click CHOOSE OS then on the new page,select the first one.
3. Insert the SD card in the card reader then plug the card reader into the computer. You should click CHOOSE SD CARD to let the following SD Card page appear. Now, select the SD card information bar. Back to the RPi page and click WRITE to download and flash the RPi system.
Step2: Driver Installation
1. Create an empty file named "ssh" without a suffix in the directoy /boot.
2. Download the driver file LCD-show190115.tar.gz and copy to /boot.
2. Connect the RPi & the screen. Align the pin header on the RPi with that on the screen. At the same time, take out the SD card from the card reader to insert it into the SD slot on RPi. Then plug the RPi power adapter and network cable.
3. The RPi starts as soon as it's connected to the power supply. Next, you can find your RPi ip.
- i. Check the RPi ip via Advanced IP Scanner.
- ii. Advanced IP Scanner download link: https://filehippo.com/download_advanced_ip_scanner/
- iii: You can use router management page to check the wired connection.
4. Plug the internet cable and the sd card into RPi, then connect the RPi to the power supply.Now, you can find your RPi ip on the RPi management page.
- Got the ip, you can use putty tool to control RPi remotely via ssh remote connection. Note: The password characters are hidden when you are entering.
5. Type in the following commands in order. Press "Enter" once each time you've finished one line.
cd /boot sudo tar zxvf LCD-show-190115.tar.gz cd LCD-show/ sudo ./LCD35-show