Difference between revisions of "Install dragit"

From Wiki
Jump to: navigation, search
Line 5: Line 5:
 
For ssh: https://www.raspberrypi.org/documentation/remote-access/ssh/README.md <br>
 
For ssh: https://www.raspberrypi.org/documentation/remote-access/ssh/README.md <br>
 
For VNC: https://www.raspberrypi.org/documentation/remote-access/vnc/README.md <br>
 
For VNC: https://www.raspberrypi.org/documentation/remote-access/vnc/README.md <br>
 +
Now you're on the RPi already. Open a terminal for command lines. Let's see what's next. <br>

Revision as of 08:00, 6 September 2018

Before any operations, you need to log into the Raspberry Pi remotely first. Here's how:
1. Get the IP address of the Raspberry Pi:
https://www.raspberrypi.org/documentation/remote-access/ip-address.md
2. Log in with the IP address, by ssh or VNC:
For ssh: https://www.raspberrypi.org/documentation/remote-access/ssh/README.md
For VNC: https://www.raspberrypi.org/documentation/remote-access/vnc/README.md
Now you're on the RPi already. Open a terminal for command lines. Let's see what's next.