Difference between revisions of "Gesture Recognition Sensor Module(GY- PAJ7620U)"

From Wiki
Jump to: navigation, search
(Introduction)
(Introduction)
Line 2: Line 2:
 
== '''Introduction''' ==
 
== '''Introduction''' ==
 
[[File:GY-PAJ7620U2_1.jpg]]
 
[[File:GY-PAJ7620U2_1.jpg]]
[[File:GY-PAJ7620U2_2.jpg]]
+
[[File:GY-PAJ7620U2_2.jpg]]<br>
 
PAJ7620U2 integrates the gesture recognition function and general purpose I2C interface into a single chip. PAJ7620U2 has build in proximity sensing function that is used to detect the approaching or leaving objects. The gesture information can be easily accessed by using I2C bus
 
PAJ7620U2 integrates the gesture recognition function and general purpose I2C interface into a single chip. PAJ7620U2 has build in proximity sensing function that is used to detect the approaching or leaving objects. The gesture information can be easily accessed by using I2C bus
  

Revision as of 02:44, 13 November 2019

Introduction

GY-PAJ7620U2 1.jpg GY-PAJ7620U2 2.jpg
PAJ7620U2 integrates the gesture recognition function and general purpose I2C interface into a single chip. PAJ7620U2 has build in proximity sensing function that is used to detect the approaching or leaving objects. The gesture information can be easily accessed by using I2C bus

Features

  • Typical supply voltage ranges from 2.8V to 3.3V and I/O voltage is 1.8V~3.3V
  • Nine gesture recognition (Up / Down / Left / Right / Push / Pull / CW / CCW / Wave)
  • Gesture speed is from 60°/s to 600°/s in Normal Mode and 60°/s to 1200°/s in Gaming Mode
  • Ambient light immunity: < 100k Lux
  • Built-in proximity detection
  • Flexible power saving scheme
  • I2C interface up to 400 kbit/s, Pull-up voltage from 1.8V to 3.3V
  • Ambient light noise cancellation

Introduction of Pins

VIN:Power Supply
GDN:Ground
SCL:I2C clock pin
SDA:I2C data pin
INT:Interrupt pin(Active low)