Collision Switch Module

From Wiki
Revision as of 08:26, 3 September 2019 by Root (Talk | contribs) (Introduction of Pins)

Jump to: navigation, search

Introduction

The Crash sensor is a miniature snap-action switch. It is also known as micro switch, an electric switch activated by a small physical force.
Collision Switch Module(front).pngCollision Switch Module(rear).png

feature

  • Special module with ports compatible with the expansion board of sensor.
  • Output low level when the module is activated; keep outputting high level at the state of release.
  • Applied in the detection of collision and touching impact.

Introduction of Pins

Introduction of Pins
     OUT
     Switching signal output
     VCC
     positive pole
     GND
     negative pole