Difference between revisions of "4 Inch Touch Screen Monitor for Raspberry Pi"

From Wiki
Jump to: navigation, search
(Step2)
(Introduction)
 
(5 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
===Introduction===
 
===Introduction===
This monitor is specially designed for Raspberry Pi.First use requires some configuration
+
<br>
[[File:SC009 1.png]]<br>
+
[[File:SC009 1.png|500px]]
 +
<br>
 +
This 4 inch LCD Touchscreen fits snuggly on top of the Raspberry Pi, a little wider than Raspberry Pi, but totally beneficial to take your projects from good to great. The resistive touchscreen provides you with an easy way to display information coming off of the Raspberry Pi and the OS currently running on it.<br><br>
 +
 
 +
The 4 touch screen with resolution 480*320 and has a high refreshing rate, nearly 50-60 frames per second, thus giving you the best fantastic game-play and vedio-watching experience. The back light switch of this LCD touch screen HAT can be turned off to lower power consumption. Simply plug the 13x2 GPIO header into your desired Raspberry Pi and you'll be able to start using your new resistive touch screen!<br><br>
 +
 
 +
Note: The screen is not driver-free, you will need to install a driver to play.<br>
 +
 
 +
== Features ==
 +
<ul>
 +
    <li>Screen Size: 4inch</li>
 +
    <li>Type: TFT, Resistive Touch</li>
 +
    <li>Interface: SPI/GPIO</li>
 +
    <li>SPI Driver Speed: 125mHZ</li>
 +
    <li>Resolution: 480x320(pixel)</li>
 +
    <li>Backlight switch: turn on/off the backlight to save power</li>
 +
    <li>Dimension: 95.5×61mm</li>
 +
    <li>Power Consumption: 5V 0.16A</li>
 +
</ul>
 +
== Package Including ==
 +
<ul>
 +
    <li>1 x 4inch Touch Screen</li>
 +
    <li>1 x Touch Pen</li>
 +
</ul>
 +
 
 
===Step1===
 
===Step1===
 
Download the image you need by accessing the Raspberry Pi official tool
 
Download the image you need by accessing the Raspberry Pi official tool
Line 7: Line 31:
 
https://www.raspberrypi.org/downloads/
 
https://www.raspberrypi.org/downloads/
 
<br>
 
<br>
[[File:SC009 2.png]]
+
[[File:SC009 2.png|500px]]
 
<br>
 
<br>
 
The following page pops up after the tool installation.
 
The following page pops up after the tool installation.
 
<br>
 
<br>
[[File:SC009 3.png]]
+
[[File:SC009 3.png|500px]]
 
<br>
 
<br>
 
Click "CHOOSE OS" to choose the control system.
 
Click "CHOOSE OS" to choose the control system.
 
<br>
 
<br>
[[File:SC009 4.png]]
+
[[File:SC009 4.png|500px]]
 
<br>
 
<br>
 
Click "CHOOSE SD CARD".
 
Click "CHOOSE SD CARD".
 
<br>
 
<br>
[[File:SC009 5.png]]
+
[[File:SC009 5.png|500px]]
 
<br>
 
<br>
 
Click "WRITE" to start writing in the system. Please wait for a moment.
 
Click "WRITE" to start writing in the system. Please wait for a moment.
 
<br>
 
<br>
[[File:SC009 6.png]]
+
[[File:SC009 6.png|500px]]
 
===Step2===
 
===Step2===
 
<ol>
 
<ol>
Line 29: Line 53:
 
     <ul>
 
     <ul>
 
         <li>Create an empty file named "ssh" without a suffix in the directoy /boot.</li>
 
         <li>Create an empty file named "ssh" without a suffix in the directoy /boot.</li>
         <li>[[File:SC009 7.png]]</li>
+
         <li>[[File:SC009 7.png|500px]]</li>
 
     </ul>
 
     </ul>
 
<li>Connect the RPi & the screen as shown. Align the pin header on the RPi with that on the screen.</li>
 
<li>Connect the RPi & the screen as shown. Align the pin header on the RPi with that on the screen.</li>
[[File:SC009 8.png]]
+
[[File:SC009 8.png|500px]]
 
<li>Insert the SD card into the SD slot on RPi. Then plug the RPi power adapter and network cable.</li>
 
<li>Insert the SD card into the SD slot on RPi. Then plug the RPi power adapter and network cable.</li>
<li>4. The RPi starts as soon as it's connected to the power supply. Next, you can find your RPi ip.</li>
+
<li>The RPi starts as soon as it's connected to the power supply. Next, you can find your RPi ip.</li>
 
     <ul>
 
     <ul>
 
         <li>Check the RPi ip via Advanced IP Scanner.</li>
 
         <li>Check the RPi ip via Advanced IP Scanner.</li>
Line 43: Line 67:
 
         <li>putty download link: https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html</li>
 
         <li>putty download link: https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html</li>
 
         <li>Download finished, putty page is as shown. You need to input RPi ip, and type in 22 in the port box. Check ssh and click open to connect with RPi.</li>
 
         <li>Download finished, putty page is as shown. You need to input RPi ip, and type in 22 in the port box. Check ssh and click open to connect with RPi.</li>
         <li>[[File:SC009 9.png]]</li>
+
         <li>[[File:SC009 9.png|500px]]</li>
 
     </ul>
 
     </ul>
 
<li>The terminal page appears once you click open. By default, the ID is "pi" and the password is "raspberry". Note the alphabetic case.</li>
 
<li>The terminal page appears once you click open. By default, the ID is "pi" and the password is "raspberry". Note the alphabetic case.</li>
 
'''Note: The password characters are hidden when you are entering.'''
 
'''Note: The password characters are hidden when you are entering.'''
 
<br>
 
<br>
[[File:SC009 10.png]]
+
[[File:SC009 10.png|500px]]
 
<br>
 
<br>
 
<li>Type in the following commands in order. Press "Enter" once each time you've finished one line.</li>
 
<li>Type in the following commands in order. Press "Enter" once each time you've finished one line.</li>

Latest revision as of 03:31, 8 April 2020

Introduction


SC009 1.png
This 4 inch LCD Touchscreen fits snuggly on top of the Raspberry Pi, a little wider than Raspberry Pi, but totally beneficial to take your projects from good to great. The resistive touchscreen provides you with an easy way to display information coming off of the Raspberry Pi and the OS currently running on it.

The 4 touch screen with resolution 480*320 and has a high refreshing rate, nearly 50-60 frames per second, thus giving you the best fantastic game-play and vedio-watching experience. The back light switch of this LCD touch screen HAT can be turned off to lower power consumption. Simply plug the 13x2 GPIO header into your desired Raspberry Pi and you'll be able to start using your new resistive touch screen!

Note: The screen is not driver-free, you will need to install a driver to play.

Features

  • Screen Size: 4inch
  • Type: TFT, Resistive Touch
  • Interface: SPI/GPIO
  • SPI Driver Speed: 125mHZ
  • Resolution: 480x320(pixel)
  • Backlight switch: turn on/off the backlight to save power
  • Dimension: 95.5×61mm
  • Power Consumption: 5V 0.16A

Package Including

  • 1 x 4inch Touch Screen
  • 1 x Touch Pen

Step1

Download the image you need by accessing the Raspberry Pi official tool
https://www.raspberrypi.org/downloads/
SC009 2.png
The following page pops up after the tool installation.
SC009 3.png
Click "CHOOSE OS" to choose the control system.
SC009 4.png
Click "CHOOSE SD CARD".
SC009 5.png
Click "WRITE" to start writing in the system. Please wait for a moment.
SC009 6.png

Step2

  1. The good use of the screen requires you to install a driver and you can do it by connecting to RPi via ssh.
    • Create an empty file named "ssh" without a suffix in the directoy /boot.
    • SC009 7.png
  2. Connect the RPi & the screen as shown. Align the pin header on the RPi with that on the screen.
  3. SC009 8.png

  4. Insert the SD card into the SD slot on RPi. Then plug the RPi power adapter and network cable.
  5. The RPi starts as soon as it's connected to the power supply. Next, you can find your RPi ip.
  6. Got the ip, you can use putty tool to control RPi remotely via ssh remote connection.
  7. The terminal page appears once you click open. By default, the ID is "pi" and the password is "raspberry". Note the alphabetic case.
  8. Note: The password characters are hidden when you are entering.
    SC009 10.png

  9. Type in the following commands in order. Press "Enter" once each time you've finished one line.
    1. sudo rm -rf LCD-show
    2. git clone https://github.com/goodtft/LCD-show.git
    3. chmod -R 755 LCD-show
    4. cd LCD-show/
    5. sudo ./MHS40-show


    The above commands executed, the system restarts automatically for display and touch in good condition.